NOTE: v787 has been factory installed on the following devices: CHD 1802 Ser# 6027 and up CHD 1812 Ser# 5618 and up. New Hardware (check S/N label for CHD 1812-1 / CHD 1802-1) CHD 1802-1 Ser# 1000 and up CHD 1812-1 Ser# 1000 and up RELEASE NOTESV 787 - [Current Release]*reduced processing delay in frame sync mode --------------------------------- This is a cumulative Upgrade which includes previous releases below:V 786 - [Current Release]* CHD1812: solved an issue where video delay user settings were not stored properly over a power cycle V 676 + Added support for 3G - SDI Level B Dual Link signals (selectable in yelloGUI version 2.2.0 and above) for modules CHD18x2-1 (s/n 1000 and above) * Solved an issue where last luma pixel could be black in the SDI output signal * Revised "SDI Output Resolution" function for some specific standard combinations V 667 * if a DVI input signal is detected, the output color range is now switched to RGB-full in auto-mode V 650 * improved SDI output stability when locking to HDMI input signals with high jitter V 631 + added user-delay of video-output feature in lines, pixels or microseconds (CHD1812) * revised insertion of VPID in second field * optimized RGB input Range/SDI output range V 593 * revised SD-SDI output signal for 525 with external reference (CHD1812) V 590 * revised yellobrik installer (improved LYNX USB driver installation) V 583 * small bugfixes V 544 * revised image conversion for NTSC input standards * revised module initialization behavior which could lead to a missing output signal after power-up in some special cases + added function which allows HDMI embedded audio insertion into SDI stream A, SDI stream B or into both streams of 3G-SDI level B dual stream output + added function which limits video standards in EDID to a subset of standards for avoiding problems while using HD-SDI equipment + added 3D Frame-Packing support for 1080p30/29/25/24/23 and 720p60/59/50/30/29/25/24/23 + added yelloGUI support V 531 * revised SDI output signal of 1080p50 and 1080p60 HDMI inputs V499 * fixed embedding mode if using DVI-D input Signals * revised handling of some PC input standards V486 * revised handling of 480p and 576p HDMI input standards * revised colorspace conversion when using RGB HDMI input standards * changed audio bit depth default for all groups to 20 bits in SDTV mode * removed AC3 entry from EDID * revised supported video standard list in the EDID * fixed Data Block Number (DBN) generation of the audio embedder * fixed audio selection activation after power up * fixed audio embedder instability after re-connecting a HDMI source + added support for 1080psf23.98 and 1080psF24 reference input standards + added insertion of Active Format Description (AFD) to the SDI output V 472 + Fixed blanking for SD-SDI output standards + Fixed vertical start of active video for all standards + Fixed audio group selection (for external analog audio) after power up + Added audio delay compensation in Reference Lock Mode + Added interlacer for 480p/576p to 480i/576i conversions + Added support for VGA, SVGA, XGA, WXGA & WUXGA V 470 + Revised Reference Lock mode to maintain Ref In to SDI Out Zero Timing in Framesync Mode + Changed EDID to support AC3 audio streams on the HDMI input+ Revised HDMI input sync to accept unstable HDMI sources + Fixed wrong audio channel assignment+ Added suppor